How to Set Up Your Inflatable Bouncy Hopper

Inflatable Bouncy Hopper Setup

Getting your hopper ready is quick and easy. Just follow the steps below for the best bounce and play experience.

1. Unfold the hopper
Place the hopper on a flat surface and find the two air valves on the body and head.

2. Check the valve first
Each valve has a double-seal design. Before inflating, firmly press the inner plug closed first.

3. Inflate the body
Use the pump with the medium nozzle to inflate the body first.

4. Seal it tightly
Once the body is firm and bouncy, close the outer cap tightly, then firmly push the whole valve into the product.

5. Inflate the head
Inflate the head the same way. Do not overinflate.

6. Final check
Make sure both valves are fully closed and pushed in securely before play.

Make sure the valve is nice and tight, so the air stays in.
Before playtime, give it a quick check and add air if needed for the best bounce.