Large Inflatable Punching Bag Setup

Set up your QPAU Inflatable Punching Bag in just a few easy steps.

Whether it’s for active play, energy release, or everyday fun, this quick guide will help you get your punching bag ready the right way.

What’s in the Box

Your package includes:

• 1 Inflatable Punching Bag
• 1 Pair of Gloves
• 1 PVC Repair Patch
• 1 Wrist Strap
• 1 Instruction Manual

How to Set It Up

1. Fill the base with water

Unscrew the cap, remove the water plug, and fill the base with about 5–6 gallons of water. Then close the water plug tightly and screw the cap back on.

2. Check the valves first

All 3 valves have a double-seal design, so firmly press the inner plug closed first before inflating.

3. Inflate the base

Use a medium nozzle to inflate the base, then close the valve tightly and push it fully into the air chamber.

4. Inflate the connection section

Use a small nozzle to inflate the connection section, then close the valve tightly and push it into the air chamber.

5. Inflate the punching bag

Use a medium nozzle to inflate the punching bag, then close the valve tightly and push it into the air chamber.

6. Ready to punch

Once everything is inflated and sealed, your punching bag is ready for play.

Helpful Tips

Seal the valves tightly

To help prevent quick air leaks, make sure each valve is fully closed and pushed in securely after inflating.

Check air before play

Before each use, give it a quick check and add air if needed for the best bounce-back performance.

Do not overinflate

Inflate until each section feels firm and full, but avoid overinflating.

Good to Know

If the punching bag seems to lose air quickly, please check whether the valves are fully sealed first. In many cases, the issue is caused by a valve that was not completely closed or pushed in all the way.

Let the Fun Begin

Now it’s time to put on the gloves and start punching. Enjoy the bounce, the movement, and the fun.